Cisco: Cek AS5300 Voice Port

Setelah link fisik sudah UP, yang dicek berikutnya link “BILLING”

kalau status di layer 2 sudah “MULTIPLE_FRAME_ESTABLISHED” berarti sudah siap dikirim traffic.

Belajar1#sh isdn status
Global ISDN Switchtype = primary-net5
ISDN Serial0:15 interface
        dsl 0, interface ISDN Switchtype = primary-net5
    Layer 1 Status:
        ACTIVE
    Layer 2 Status:
        TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
    Layer 3 Status:
        0 Active Layer 3 Call(s)
        CCB:callid=F75B, sapi=0, ces=0, B-chan=1, calltype=VOICE
    Active dsl 0 CCBs = 1
    The Free Channel Mask:  0xFFFF7FFE
    Number of L2 Discards = 0, L2 Session ID = 5

Read more »

Cisco: Upgrade vcware dan dspware modul dsp AS5300

Berawal dari tidak sesuainya firmware modul DSP dengan IOS yang terpasang :(
hikz

GAMBIR1#sh vfc 1 version vcware

Voice Feature Card in Slot 1:
     VCWare Version     :  11.32
     ROM Monitor Version:  1.3
     DSPWare Version    :  4.1.32
     Technology         :  C549
Firmware version mismatch for bundle AS5300 VCWare
  - version found (11.32) is lower than minimum required (11.41)
Firmware version mismatch for bundle AS5300 C549
  - version found (4.1.32) is lower than minimum required (4.1.41)

GAMBIR1#sh vfc 2 version vcware

Voice Feature Card in Slot 2:
     VCWare Version     :  11.31
     ROM Monitor Version:  1.3
     DSPWare Version    :  4.1.31
     Technology         :  C549
Firmware version mismatch for bundle AS5300 VCWare
  - version found (11.31) is lower than minimum required (11.41)
Firmware version mismatch for bundle AS5300 C549
  - version found (4.1.31) is lower than minimum required (4.1.41)

Pada contoh dibawah, akan di berikan tutorial untuk meng-upgrade firmware DSP di modul nomer 2.
Read more »

Cisco: cek port E1

Sebetulnya ini pernah tahu, tapi berhubung lama tidak pakai E1, bener2 lupa ooiiiii

biar ndak bikin malu dengan sering bertanya, saya dokumentasikan saja

GAMBIR1#sh controllers e1 0
E1 0 is up.
  Applique type is Channelized E1 - balanced
  No alarms detected.
  alarm-trigger is not set
  Version info of slot 0:  HW: 1, PLD Rev: 11
  Framer Version: 0x8

Manufacture Cookie Info:
 EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x4B,
 Board Hardware Version 3.1, Item Number 800-3881-02,
 Board Revision B0, Serial Number 25355495,
 PLD/ISP Version 0.1,  Manufacture Date 20-Aug-2001.

  Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line Primary.
  Data in current interval (345 seconds elapsed):
     2 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 2 Line Err Secs, 0 Degraded Mins
     2 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs